Model
WD-G3FCT
Adaptive Model
WD-G3P800-W & WD-G3-W
Faucet appearance
Brushed nickel
Material
304 Stainless Steel
How to install the water filter faucet?
1. Insert the faucet spout into the faucet body.
2. Insert the faucet stem, power cord, and filtered water tubing into the hole on the countertop.
3. Under the sink, slip on the nut and tighten it up.
4. Cut the PE tube that connects to the purifier at a spot 4 inches from the end of the faucet (cut cleanly and squarely). Insert the two ends of the PE tube that have been cut into the inlet and outlet of the UV sterilizer.
*Note: If your kitchen sink or countertop does not have an existing hole. you will have to drill one (1 inch).
View the install video: https://www.youtube.com/embed/SHj8vaHkJp4
How do you clean a reverse osmosis kitchen faucet?
The delicately designed reverse osmosis kitchen faucet is unlikely to get rust, corrosion, and tarnishing during everyday use for the lead-free 304 stainless steel. Thus, you won’t be bothered by cleaning the water dispenser faucet frequently.
Applicable to WD-G3-W/WD-G3P800-W
The faucet of the RO system can be matched with either WD-G3-W or WD-G3P800-W, which will give you a perfect use experience.
Visible Fresh Water Quality
The TDS monitor of the reverse osmosis water filter system tells you the quality of your filtered water, while the filter life tracker shows how soon you need to replace your filter.
Best-in-Class Exclusive Faucet
The smart faucet of the reverse osmosis water filtration system is made from lead-free 304 stainless steel, which can effectively resist rusting, corrosion, etc. The 360-degree rotating faucet also improves convenience during use.
90° Single Lever handle & 360° Swivel Spout
This state-of-the-art reverse osmosis water faucet with a 360-degree swivel spout and a quarter-turn handle avoids splashes and makes sure you get water more easily.
