Model number
WD-8065s
Working pressure
25-125psi
Operating temperature
41-100℉
Feed water requirement
Municipal tap water or centralized water supply
Flow rate
10GPM
Recommended replacement cycle
6 months
High water hardness can cause a variety of problems.
Depending on where you live, your home’s water supply might have unusually high mineral levels. Aside from typical issues like hard water stains and laundry problems, this can also lead to limescale building up inside your pipes and damaging your water heater.
When scale buildup gets bad enough, it makes your heater far less efficient. Having to work much harder also significantly reduces its lifespan. Any appliances that use hot water in your home, plus downstream plumbing fixtures like faucets and showerheads, are just as vulnerable.
Keep your water heater and appliances protected with the Waterdrop Scale Inhibitor Water Filter System!
Our water scale inhibitor is specifically designed to control these minerals in your water through the use of premium polyphosphates. Thanks to this, you can look forward to significantly improved water quality and maximum performance!
We’ve designed our scale inhibition system with reliability in mind, which is why the cartridge housing features anti-burst properties. Made out of durable food-grade, BPA-free plastic, it is not vulnerable to damage or leaks. Each whole house scale filter will typically last 6 months depending on water conditions!
Setting up this scale inhibitor water system is fast and easy. Just install it on the cold water line feeding your water heater – the 3/4 inch NPT connections ensure a seamless fit and excellent flow rate. Because of how simple it is to replace the cartridge, future maintenance won’t be a concern either.
Still not sure? Here’s what else you should know about our water scale inhibitor:
Helps ensure a safe and pleasant water use experience
Operating temperature range of 40-100°F
Pressure range of 30-125 psi
Take care of your plumbing. Add the Waterdrop Whole House Scale Inhibition Water System to your cart TODAY!
What is a scale inhibitor water system?
The scale inhibitor water system employs polyphosphates in filter, helping keep your water heaters, hot water using appliances, and plumbing fixtures protected from scale buildup while also maintaining efficiency.
How does Waterdrop scale inhibition water filter system work?
By utilizing premium food-grade polyphosphates, our scale inhibitor water system helps prevent the accumulation of limescale and rust along your household’s pipes. It efficiently controls the mineral levels of the water that passes through it, which supports the optimal performance of all appliances or plumbing fixtures downstream. Improve the performance of your water system with just one filter.
Do I really need a scale inhibition water treatment?
Water hardness varies from place to place. Some households are lucky enough that they never have to deal with the headaches it presents. But for areas with very high mineral levels, special care must be taken to prevent damage to the water heater and other fixtures. This is because the calcium, magnesium, and other minerals in your water can start building up inside the heater, greatly affecting its efficiency and reducing its lifespan. And the whole house scale inhibitor water filter system by Waterdrop helps you avoid scale buildup.
What causes scaling in water pipelines?
Depending on where you live, your home’s water supply might have unusually high mineral levels.
Is water scale inhibitor safe to use?
Yes. The scale inhibitor water filter system is made out of durable food-grade, BPA-free plastic, which is not vulnerable to damage or leaks.
How long does a Waterdrop scale inhibitor water filter system last?
Each whole house scale filter can last 6 months with regular use and is designed not to leak or burst.
Is water scale harmful to our health?
No, it won’t endanger your health. But it damages the water heater and other fixtures. This is because the calcium, magnesium, and other minerals in your water can start building up inside the heater, greatly affecting its efficiency and reducing its lifespan.
Is it easy to install a scale inhibitor water filter system?
Yes. Installing a water filter system in your property shouldn’t take up the entire weekend, so we designed our scale inhibitor water filter system to be easy to set up, even without extensive DIY experience. Simply connect it to the cold water line feeding your water heater. Removing and installing a new whole house scale filter only takes a few minutes, making ongoing maintenance a breeze for any homeowner.
What is a good water pressure for a scale inhibition system?
A scale inhibitor system’s working pressure is 25-125psi.
- The polyphosphates employed in the scale inhibitor water system can help put a stop to the gradual buildup of limescale along your pipes.
- No scale deposits in the pipeline to improve the efficiency of hot water production and save energy.
- 304 stainless steel
- 3/4’’ NPT inlet/ outlet
- Rust-free
- Makes the scale inhibitor system durable and doesn’t need to be replaced unless damaged.
- The whole family can get strong and consistent water flow.
- Replace every six months, but it depends on your local water quality.
- Don’t worry about any leakages or cross-threading.
- Helps you avoid scale buildup.