UKF7003, UKF7003AXX, UKF7003AXXP, UKF7002AXX, UKF7002, 7002, UKF7001AXX, UKF7001, 7001, UKF6001AXX, UKF6001, 6001, UKF5001AXX, UKF5001, 5001, 480181700734, 4830310100, 9511977

EDR7D1, Filter 7

763410342

PuriClean, WF288, EcoAqua EFF-6014A, WaterSentinel WSM-1, Dista DWF-16, ICEPURE RWF1600A, OnePurify RFC1600A, Puritas PUR-15, NuTruFlo NTF-16, Tier1 RWF1041, Clear Choice CLCH115, Denali Pure WF-UKF7003, UpStart Battery WF-UKF7003, Aqua Fresh WF288

A: If your refrigerator has an indicator that tells you when to change the filter, you must reset it when you replace the filter. Every manufacturer has different instructions for resetting the indicator.

• Samsung® - Press the ice type and child lock buttons simultaneously for 3 seconds. Note: Hold the buttons for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function will cease. Release the buttons and repeat the same step one more time. The water filter indicator light should turn green.
• GE and Hotpoint® - Press and hold the reset water filter button on the dispenser for 3 seconds.
• Whirlpool® and KitchenAid® - Press the light switch 5 times within 10 seconds. If the fridge has a filter button, press and hold it for 5-10 seconds.
• LG® - Press and hold the reset button for 3 seconds.
• Maytag® and JennAir® - Press and hold the lock and light buttons (lock and water on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.
• Frigidaire® - Press and hold the reset button on the dispenser until the green light flashes (up to 15 seconds).
• Amana® - Press and hold the dispenser lock and auto light buttons on the dispenser (at the same time) for 4 seconds until the filter status indicator begins to flash. Then release the buttons. On some Amana fridges, you will need to press the dispenser lock and water buttons for 4 seconds until the filter status indicator begins to flash. Then you will release the buttons.

A: Manufacturing and shipping can cause carbon particles in the media block to knock loose. This means that the first few glasses of water most likely will contain these bits, causing the water to look gray and cloudy. Flush the water several times. It will then be clean and clear.

A: No. All of the filters we manufacture can sit on your shelf until you need them. We recommend that you keep them in a cool, dark, dry location.

A: No, our filters have a USDA food-grade silicone lubricant that was applied in the factory.

A: You will need to change your refrigerator water filter every six months, as:

• It produces better-tasting and better-smelling water.
• It helps remove fine particles and sediment from the water.
• It prevents unabsorbed water contaminants and newly formed bacteria from being reintroduced into your drinking water.
• It prevents a decrease in water pressure from the dispenser.
• Drinking filtered water from your refrigerator can save you over $600 a year over the use of bottled water.

A: Current industry standards dictate that fridge filters should be changed every six months. This is their optimum lifespan. Once the filter has gotten wet during its initial use, it should be changed 6 months thereafter. This is mainly because, over a period of time, carbon begins to harbor bacteria, which may significantly reduce the filtration performance of the fridge filter and potentially enable bacterial contaminants to leach into your water.