Your Shopping Cart

It appears that your cart is currently empty!


Reverse Osmosis Water Filter

Reverse Osmosis System for Home

218 reviews


Free shipping

Tankless Reverse Osmosis Water System

218 reviews


Free shipping

Want to learn more about reverse osmosis water filter?

More filter info

What is reverse osmosis water filter system?

Reverse Osmosis System works by using a high-pressure pump to increase the pressure on the salt side of the RO membrane and force the water across the semi-permeable RO membrane, leaving almost all (around 95% to 99%) of dissolved salts behind in the reject stream. The amount of pressure required depends on the salt concentration of the feed water. The more concentrated the feed water, the more pressure is required to overcome the osmotic pressure. The desalinated water that is demineralized or deionized, is called permeate (or product) water. The water stream that carries the concentrated contaminants that did not pass through the RO membrane is called the reject (or concentrate) stream.
As the feed water enters the RO membrane under pressure (enough pressure to overcome osmotic pressure) the water molecules pass through the semi-permeable membrane and the salts and other contaminants are not allowed to pass and are discharged through the reject stream (also known as the concentrate or brine stream), which goes to drain or can be fed back into the feed water supply in some circumstances to be recycled through the RO system to save water. The water that makes it through the RO membrane is called permeate or product water and usually has around 95% to 99% of the dissolved salts removed from it.
It is important to understand that a RO system employs cross filtration rather than standard filtration where the contaminants are collected within the filter media. With cross filtration, the solution passes through the filter, or crosses the filter, with two outlets: the filtered water goes one way and the contaminated water goes another way. To avoid buildup of contaminants, cross flow filtration allows water to sweep away contaminant build up and also allow enough turbulence to keep the membrane surface clean.
This blog explains more on the reverse osmosis system.
More filter info

What is TDS?

Total Dissolved Solids (TDS) is a measure of the combined content of all inorganic and organic chemicals dissolved in water. These components could be in molecular, ionized or micro-granular suspended form. Examples of inorganic chemicals that commonly contribute to a measurement of TDS include calcium, magnesium, potassium, sodium, bicarbonate, chloride, and sulfate. Organic chemicals that may contribute to TDS can derive from land application of chemicals, industrial release of chemicals to the environment, vegetable matter, and/or animal matter. In a laboratory setting, TDS is measured by weighing the mass of solids remaining when water is evaporated completely. In practice, handheld meters are often used to approximate the TDS in water based upon a conductivity measurement. TDS varies widely from region to region (and store to store) and is generally determined by the water source (groundwater or surface water) and geologic make-up of the region. A reverse osmosis filtration system is the best solution for removing TDS from drinking water. A Reverse Osmosis system can remove above 90%* of fluoride in your water.
More filter info

How does a reverse osmosis water filter work?

A reverse osmosis system removes sediment and chlorine from water with a prefilter before it forces water through a semipermeable membrane to remove dissolved solids. After water exits the RO membrane, it passes through a postfilter to filter the drinking water before it enters a faucet.

This blog explains more on how a reverse osmosis system works.
More filter info

What are the benefits of the RO water purifier system?

RO removes lead from water and frees people from many diseases such as high blood pressure, nerve damage and low fertility. Drinking reverse osmosis water can also eliminate risks of brain damage and anemic conditions, especially in children.
More filter info

Does reverse osmosis system remove fluoride from water?

Yes! A reverse osmosis filtration system is the best solution for removing fluoride from drinking water. A Reverse Osmosis system can remove 85-92%* of fluoride in your water.
More filter info

Tankless RO water filter vs. Traditional RO with storage tank

Traditional RO with storage tank holds reverse osmosis water so you have plenty to use when you need it. A traditional reverse osmosis system makes water slowly. It takes one minute to produce two to three ounces of RO water. If you were to turn on your faucet for a glass of water at the actual membrane production rate, then you would have to wait at least 5 minutes for it to fill. With a storage tank, your glass fills instantly. But the inside of a traditional reverse osmosis tank accumulates and breed heterotrophic bacteria over time. Waterdrop tankless reverse osmosis system has overcome the issue of bacteria colonizing in the bladder tank. With no storage tank to fill, Waterdrop tankless reverse osmosis system does not run until RO water is needed.
More filter info

What contaminants will reverse osmosis system remove?

• TDS, chlorine, taste and odor, chloramine, scale, turbidity.
• Carcinogens: chromium (hexavalent), chromium (trivalent), cadmium and cadmium compounds, ferric oxide.
• Heavy metals: lead, mercury, barium, copper, radium 226/228, aluminum.
• Microorganic contaminants: cysts.
• Inorganic pollutants: arsenic and inorganic arsenic compounds, fluoride.
• Organic pollutants: asbestos, benzene, formaldehyde, trichloromethane, chlordane, PFOA & PFOS, etc.
More filter info

Does the reverse osmosis water filter system produce wastewater?

All RO systems will produce concentrated water to discharge impurities. Compared to traditional RO water purifiers, Waterdrop RO system produces less concentrated water and saves 300% more water. You can collect concentrated water to mop the floor, wash your car, do laundry, etc.
More filter info

Does Waterdrop reverse osmosis water filter system need power?

The RO system has a pump that will need power to maintain a fast water flow rate.
More filter info

Can this RO filter be used with hard water?

This machine can be used with hard water, and the TDS removal rate will be 90% and above. But we do not recommend using it as a source for the RO system directly.
More filter info

Where to use a reverse osmosis system?

Below are few industrial applications of RO systems:
1. Boiler feed-water treatment
2. Pharmaceuticals
3. Food and Beverages
4. Semiconductors
5. Metal finishing
6. Power generation
Below are a couple of areas of the household setting where RO systems come really handy:
1. Ice machines
2. Faucets
3. Well water
4. Aquariums
5. RVs.
More filter info

Reverse osmosis components

1. The reverse osmosis membrane is just one of the many basic components you find in RO filter systems.
2. Cold water line valve, which is the water source for the RO system.
3. Pre-filter(s), which takes in the water from the cold-water line valve. There may be multiple pre-filters in a system. Most pre-filter types include sediment filters and carbon filters. Sediment water filters are designed to remove sediments like dirt, sand, dust, and silts, while carbon water filters remove chlorine. Carbon filters may be absent in some RO water systems with a cellulose tri-acetate(CTA) membrane.
4. Post-filter(s) – water from the RO storage tank goes through the post filter(s) before it gets to the RO faucet. These filters are mostly carbon, and this is the stage where odors and tastes are removed via post-filtration processes.
5. Automatic shut off valve (ASOV) is included to stop water from entering an already full storage tank. It shuts off the flow of filtered water, and ultimately the flow of water into the drain. It opens when the pressure in the tank drops to allow the flow of water into the membrane and wastewater to the drain.
6. Check valve, which ensures that pressurized filtered water in the storage tank is not forced back to the RO membrane when the ASOV has blocked the feed water pressure.
7. Flow restrictor, for regulating the water flowing through the RO membrane. It sets the flow rate that is best for the highest quality drinking water and maintains the same. You can find it in the RO drain line tubing.
8. Storage tank is where the filtered water is stored until it is drawn out of the faucet. It comes in different sizes and contains a bladder that maintains the right internal pressure when it is full.
9. Faucet, commonly installed on the kitchen sink, is where you draw the filtered water from.
10. The drain line is the line that connects the outlet end of the RO membrane to the drain. Contaminants that cannot make it through the RO membrane passes through the drain line out of the RO water system.